The i-Raman is part of our award-winning line of portable Raman spectrometers. It delivers high resolution combined with field-portability, providing performance comparable to large benchtop Raman systems while only weighing less than 7 lbs. The system’s small footprint, lightweight design and low power consumption (optional battery) provide research grade Raman capabilities anywhere!
The i-Raman offers 532nm and 785nm excitation wavelength standard and high resolution configurations measuring from 65 cm-1 to 4000 cm-1.
All i-Raman systems feature a TE-cooled CCD detector, allowing for the
maximum effective integration time of several minutes. This makes the
i-Raman an economical solution for many Raman applications such as
teaching, product development, materials science research and quality
|532nm Excitation||>40mw at laser port (50mW max)|
|785nm Excitation||>320mw at laser port (420mW max)|
|Laser Power Control||0-100%|
|i-Raman-532S||150cm-1 - 4000cm-1||~ 4.5cm-1 @ 614nm|
|i-Raman-532H||150cm-1 - 3300cm-1||~ 3.5cm-1 @ 614nm|
|i-Raman-785S||150cm-1 - 3200cm-1||~ 4.5cm-1 @ 912nm|
|i-Raman-785H||150cm-1 - 2700cm-1||~ 3.5cm-1 @ 912nm|
|Computer Interface||USB 2.0 / 1.1|
|Trigger||Yes (Compatible with B&W Tek Probes)|
|DC (Standard)||5V DC @ 8 Amps|
|Detector Type||TE Cooled Linear Array|
|Pixel Size||14μm x 200μm|
|TE Cooling Temperature||10°C|
|Dynamic Range||1300:1 (typical)|
|Digitization Resolution||16-bit or 65,535:1|
|Integration Time||5ms - 65,535ms|
|Dimensions||6.7 x 13.4 x 9.2in (17 x 34 x 23.4cm)|
|Weight||~6.6 lbs (~3 kg)|
|Operating Temperature||10°C - 35°C|
|Storage Temperature||-10°C - 60°C|
|Humidity||10% - 85%|
|*Typical resolution measured using atomic emission lines. Center wavelength and linewidth not guaranteed|
Creating Raman Scatter
In Raman spectroscopy, it is essential to utilize a clean, narrow bandwidth laser due to the fact that the quality of the Raman peaks are directly affected by the sharpness and stability of the delivered light source. The i-Raman® spectrometer system features a patented CleanLaze® technology with a linewidth < 0.3nm when equipped with our 785nm laser. This technology results in the correct center wavelength and avoids the phenomenon of "mode hopping." In addition, the laser output power can be adjusted in the software from 0 - 100%, allowing you to maximize the signal-to-noise ratio and minimize integration time.
Laser lifetime of 10,000 hours ensures quality data for years to come!
Collects Data within 150cm-1 of the Rayleigh Line
The center wavelength of the laser line is precisely maintained even when the peak power is increased by utilizing a series of high end filters. A laser line filter is used to clean up any side bands and ensure a narrow excitation is delivered to the sample by removing all secondary excitation lines before exciting the sample. The light collected from the sample is then filtered via a notch filter. Finally, an ultra steep long pass filter further removes lingering laser lines to allow accurate measurement of Raman peaks as close as 175 cm-1 from the Rayleigh line. An E-grade filter upgrade is available, allowing the measurement of Raman peaks as close as 65 cm-1 from the Rayleigh line.
Cooled Detector for Low-Light Level Detection
Cooling an array detector with a built-in thermoelectric cooler (TEC) is an effective way to reduce dark current and noise to enhance the dynamic range and detection limit. The graphs below show the dark current and noise for an uncooled versus a cooled CCD detector at an integration time of 30 seconds. Operating at room temperature, the dark current nearly saturates the uncooled CCD. When the CCD is cooled to 10°C, the dark current is reduced by four times. This allows the spectrometer to operate at long integration times and detect weak optical signals.
Optimized for Raman Spectroscopy
The spectrometer design in the i-Raman® is dedicated for Raman applications. You can customize your spectrometer by choosing from a variety of excitation wavelengths. In addition, each configuration can be further customized for your individual detection needs. Choose from wider spectral range or high resolution optimized systems. Research grade spectral resolution of 3 cm-1 can be achieved with our double pass transmission optics. Most Raman applications do not require such tight resolution, so a wider spectral range would be the better choice in that case. The high-throughput optical layout of all i-Raman® configurations are ideal for those low-light level Raman applications.
Easy Transition Between Sample Types
The probe allows for measurement of various materials in the form of liquids, gels, powders, or solids under both lab conditions (lab grade) or demanding environmental conditions (industrial grade). Constructed with state-of-the-art telecom packaging techniques, the probe has a flexible fiber coupling encased in a durable protective jacketing material which delivers Rayleigh scatter rejection as high as 10 photons per billion. Wavelength excitation probes come in 532nm or 785nm,
State-of-the-art Chemometric Software
B&W Tek offers comprehensive software packages that provide solutions for Raman application needs. Powerful calculations, easy data management, and user friendly, easy-to-follow work flow are all at the tips of your fingers.
BWSpec®, provided with every Raman spectrometer, is the foundation for all B&W Tek software platforms. Built on the proven BWSpec® platform, BWID® (optional) is optimized for rapid identification and verification of materials. For industrial Raman applications in regulated environments: BWID®- Pharma supports requirements for electronic signature and audit trails in accordance with US FDA 21 CFR Part 11.
B&W Tek's software portfolio also includes BWIQ®, a multivariate software package for analysis of spectral data including exploratory and qualitative analysis, and quantitative regression methods along with the ability to perform real-time predictions. BWIQ® offers an intuitive user interface and intelligent algorithms implemented with efficient matrix calculation power. BWIQ® offers traditional chemometric methods such as Partial Least Squares Regression (PLS), Principal Component Analysis (PCA) and SIMCA and Support Vector Machine (SVM) algorithms. The software includes outlier detection and a full range of preprocessing tools. Its logical workflow makes it easy to use by novice and expert users and is ideal for online use with the i-Raman® for real-time prediction and offline use with high resolution spectroscopic data.